Process Heat With Blue LEDs: Targeted Component Heating and Faster Materials Testing
High-intensity blue LED light can heat suitable materials to over 1,000 °C. The technical capabilities of this heating method and its prospects for research and industrial applications were presented at the DGM Short webinar “1000 °C? Blue light instead of hot air” on 06 November 2026. Particularly relevant are the spatially controllable heat input and the potential to accelerate materials testing through shorter heating times. The resulting benefits depend on the material, the process conditions, and the reference method used.
Delivering Process Heat Directly Into the Material
How can a component be heated in a targeted manner without first having to heat an entire furnace chamber? Dr. Lukas Porz from ILLUTHERM addressed this question in the Short webinar “1000 °C? Blue light instead of hot air”hosted by the German Society for Materials Science (DGM).
The approach presented uses high-intensity blue LED light, which is absorbed by the material and converted into heat. Unlike conventional furnace processes, which also heat the furnace walls and atmosphere, energy is delivered directly through the irradiated material surfaces.
This allows suitable materials to reach temperatures of over 1,000 °C within a short time. The heating rate actually achievable depends on factors including absorption behavior, component geometry, and heat losses.
Localized Heating Opens up New Possibilities for Process Control
A key advantage of LED technology is the ability to control heat input in both time and space. The illumination can be adapted to different component geometries and requirements. Targeted heating of individual areas of a sample is also possible.
For engineering, this is particularly relevant to processes that require defined temperature distributions. Rather than heating an entire component uniformly, thermal conditions can be tailored to specific areas.
Heat conduction within the material remains an important factor. The extent to which locally applied heat spreads must be taken into account when designing the process.
Shorter Heating Times Can Accelerate Materials Testing
The method also offers promising prospects for experimental materials development. Reaching target temperatures faster can make test series more efficient, particularly those involving numerous material variants or process parameters.
ILLUTHERM reports, for example, a test in which a steel sample was heated to over 1,000 °C within 20 seconds.
For research laboratories, this can enable higher experimental throughput. However, the heating phase alone does not determine the duration of a test. Holding times, cooling processes, sample preparation, and subsequent examinations must also be taken into account.
Metal Processing and Industrial Scale-up
ILLUTHERM's current application focus is primarily on metallic materials. The webinar also discussed prospects for the steel industry and larger-scale industrial applications.
In terms of scale-up, components up to approximately the size of a door were considered a realistic order of magnitude. In addition, the development of LED-based furnace systems with power ratings of several hundred kilowatts is envisaged for the future.
These developments highlight the potential for transferring the technology from the laboratory to larger manufacturing processes. At the same time, a distinction must be made between applications already available and future industrial systems.
Cost-Effectiveness Depends on the Specific Process
There is no general answer to whether LED-based heating also offers economic advantages. The specific process conditions and the comparison with existing heating methods are decisive.
In addition to energy requirements, heating times, material properties, equipment utilization, and investment costs are particularly important factors. A shorter process duration therefore does not automatically mean lower overall costs.
The webinar made clear that the technology's key added value cannot be measured solely by the temperature it can achieve. What matters instead is the additional possibilities that targeted heat input opens up for materials development and industrial process control.